The KL9082 is a high performance microstepping driver using pure-sinusoidal wave current control technology. It is particularly suitable for applications desired with extremely low noise and low heating. Currently most of the microstepping drivers in the market apply pseudo-sinusoidal current control technology, which makes the output current to be a distorted sine wave, or makes much current ripple, both cause the motor higher noise and bigger vibration, furthermore cause serious motor heating, so
when the motor works long time, the torque decrease, motor aging and the use life shorted. However the pure-sinusoidal precise current control technology (domestic patented technology) applied by the KL9082 can solve above problems very well and offer servo-like performances.

1: High Performance
2: Voltage: 24 to 80VDC, Max Current: 8.2A
3: Dip Switch Setting (Current): 1.8A,
2.7A,3.6A,4.6A,5.5A,6.4A,7.3A,8.2A
4: Dip Switch Setting (Micro Step):
2,4,8,16,32,64,128,256,5,10,25,50,125,250
5: TTL compatible and Optically Isolated Signal I/O
6: Full or Half Current , Sw4: Off= Half Current
7: Short-voltage, over-voltage, over-current and over temperature
protection
8: Pulse input frequency up to 200 KHz
9: Support PUL/DIR and CW/CCW modes
One Year Warrenty

Manual

 

$109.00