120-DST-A6HK1 -130mm Frame, 1.8kW, Keyed Shaft, 200V Class
130mm Frame, 1.8kW, Straight Shaft
1.8kW Medium Inertia AC Servo Motor.
Please contact us for non-standard inventory options, including holding brake, oil seal, or custom options.
Model# 120-DST-A6 _ _ 1Motor Specification
Servo Motor Model 120-DST-A6 _ _ 1 Rated Output 1.8kW Rated Voltage 200V Applicable Servo Drive DYN4-T01 Rated Torque 11.5Nm Instantaneous Max. Torque 28.7Nm Rated Current 16.7A Max. Current 36.3A Rated Speed 1500rpm Max. Speed 3000rpm Rotor Inertia 23.8kg-cm^2 Torque Coefficient 0.74N∙m/A Encoder 16-bit Absolute [ ABS-16-01 ] Mass 9.38kg Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Ambient Humidity: 20~80%
Enclosure IP65 Shock 98m/s2 Max. (10G)
Documents and Download
Frequently Asked Questions and Answers
- Are the DYN2/4 drives the only ones that work with these motors?
Yes, the drivers are shipped calibrated for those motors. While it is possible to use it for generic motors, provided that the encoder matches, tuning the servo can be quite complex and not supported. If you have an application where you really need to ...