AXBB-E Ethernet Motion Controller and Breakout Board Combined Motion Controller Unit
AXBB-E Ethernet Motion Controller and Breakout Board Combined Controller
8 optically isolated high-speed N-channel power Mosfet transistor outputs.(NPN)
9 non-isolated buffered TTL outputs to control step/dir signals, laser driver etc.
Isolated charge pump output with power N-channel Mosfet transistor.
6 high-speed optoisolator inputs.
1 IDC26 non-isolated extension port with standard LPT port pinout (12 outputs and 5 inputs).
LED indicators on isolated I/Os.
Isolated I/Os are 24Volts capable.
- Works with the UCCNC, Mach3 and Mach4 software
Documents and Download
Software, Installers and Configuration Files
Frequently Asked Questions and Answers
- What UCCNC Software version needs to be used with the AXBB-E?
You need to use UCCNC Development Version 1.2109 or above. You can download the latest UCCNC software under the Download Attachements for UCCNC or the AXBB-E board. https://www.forum.cncdrive.com/viewtopic.php?f=2&t=240&start=50  ...
- I bought a uc300eth-5lpt from you about 5 months ago. I'm now buying the UCCNC software to work with it. How does that work?
Yes, we will just need the serial number of you UC device.
- How fast does my Motion Controller need to be?
You can estimate the appropriate speed requirement for your motion controller by understanding how fast you need your pulse stream to be. You will need to balance axis travel speed and the step resolution or length of each step in actual machi...
- Should I use an External Motion Controller running in real-time for my CNC?
The main advantage of using an external motion controller is that runs all the function in a real-time environment. So many functions, like homing, reading an encoder, threading, probing, etc., are tied to the exact time in which they occur. I...