Used software: Mach3 Version 3.043.062 with Win 10 Fix.

This configuration shows how to configure the main features on a C11G using the Ethernet Smooth Stepper.  These features include:

  • E-Stop
  • 4 Axes
  • Spindle
  • Safety Charge Pump.
  • Homing.

You can also download and install the enclosed XML.

https://www.cnc4pc.com/pub/media/productattachments/files/C11G_CNC4PC.zip

 

 

 

 

 

 

 

Under Plugin Control Configure the Ethernet Smooth Stepper Plugin

 

Recommendations for verifying the Spindle Configuration:

  • The configuration you did on the initial Step by Step instructions for Mach3 or Mach4 configured the control software and plugin, you just need to set the max spindle speed.
  • Keep in mind that you need to configure the VFD to take the control signals through the terminals:
    • COMMAND VALUE DESCRIPTION
      PD001 1 Run from Terminal. 
      PD002 1 Take Reference Speed from Terminal
  • Run the spindle at different speeds and test with a DMM that you are getting a 0-10vdc from the analog output terminals that is proportional to the commanded speed.  The Relays should also activate to start the spindle in the commanded direction.  This will confirm that your configuration is OK.
  • Here is a link to the manual of the driver: https://www.automationtechnologiesinc.com/wp-content/uploads/downloads/2012/02/VFD15-22.pdf