Instructions for configuring Mach4 to use the PTS-1

 

The objective of these instructions is to have Mach4 activate the enable pin that will let the PTS-1 set in probe mode. 

  • ESS plugin version 277 
  • Mach4 version 4.2.0.4612

Make sure to use Mach4 is properly licensed.

 

Download, extract and copy the wxPlasma_Probe.set into the Mach4 screens directory.

 

Configure\Plugins\ESS V263\Pins Config

Configure\Plugins\ESS V263\Input Signal

 

Configure\Plugins\ESS V263\Output Signal

While the G31 command is probing, you should see action on the Probing LED.