CNC MILLING SPINDLE KIT 2200W (3.0HP) / MAX. 6000RPM, (BRUSHLESS MOTOR AND DRIVER),220VAC

$699.95
On request
SKU
SP2200BLM
CNC Milling Spindle Kit 2200W (3.0HP) / Max. 6000RPM, (Brushless Motor and Driver),220VAC

KL-2200_BLM Brushless Motor  2200W (3.0HP) / 6000RPM/ 220VAC
KL-2260_BLM Brushless Motor Driver kit:
AC 220VAC  input for 2200W (3HP)/500 RPM to 6000RPM Brushless Motor,
1.START----------Drives START control key
2.STOP------------Drive STOP control key
3.FWD---- --------Forward running control key
4.REV-------------- Reverse running control key
5.“S+”--------------Drive acceleration control key
6.“S-”---------------Drive deceleration control key

START---Press this button under resting status is to START motor, at starting status, press this button is invalid
STOP---Press this button to STOP motor at running state, at the stop state, click this button is invalid
FWD--- motor will run on axial clockwise/anticlockwise as designed program after start motor.

REV---Press REV button motor will run at axial anticlockwise/clockwise direction against FWD. It is invalid operation for press this button when motor running at reverse status as designed program.
"S+"--- Acceleration control key. One short press to this button, motor speed will increase 20 RPM. Long press on this button to increase rotating speed rapidly, and only 5 seconds needed for speed from lowest up to highest.

"S-"--- Deceleration control key. One short press to this button, motor speed will decrease 20 RPM, Long press on this button to decrease rotating speed rapidly, and only 5 seconds needed for speed from highest to lowest. Motor will stop quickly if press "S-" and STOP at same time.

Change to revere direction: swap V & W along with SA & SB

Drawing (Downloads)
KL-2200MillingSpindle (17)

Wiring Sample (Downloads)
cncmillspindlekit (3142)

Spindle Mach3 Setup  (Downloads)
cncmillspindlemach3setup (2674)

More Information
SKUSP2200BLM
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

   Frequently Asked Questions and Answers


   Ask a question

Terms & Conditions

There is no content for Term & Conditions.
I Agree with the Terms
© 2017 CNC4PC. All Rights Reserved.