Connector Board for Leadshine ES-DH Driver
$19.25
In stock
SKU
C34ES-DH
CNC4PC
CONNECTOR BOARD FOR LEADSHINE ES-DH DRIVER
OVERVIEW
This interfaces board is used for the connection between C82, C76, C86ACORN, C86MASSO, and the Leadshine ES-DH AC SERVO-DRIVE.
FEATURES
-
HDM44D connector for Connection of Driver.
-
RJ45 Connector for Axis.
-
Select Jumper for Hard Enable or Soft Enable.
Compatible Drivers:
- ES-MH23480
- H2-2206
- 3HSS2208H-110 Stepper Servo Driver
- HB860MB
| SKU | C34ES-DH |
|---|---|
| Manufacturer | CNC4PC |
Write Your Own Review
Documents and Download
Product Manual
-
User manual Size: (565.75 KB)
Wiring Information
- Wiring Sample C34ES-DH Rev1 with C76, M16D, C82 and Driver ES-DH
-
Go to blog - Wiring Sample for C34ES-DH with C86MASSO-G3
- Go to blog
External Document
- Closed-Loop 110 AC Stepper-Servo Manual Size: (4.08 MB)
Frequently Asked Questions and Answers
- Can this be used for both soft enable and drive error at the same time? If so, are you controlling the soft enable thru the 5v getting switched by SCHP function? With three outputs from C78 into each RJ45 I dont understand how enable and error both work.
I think there may be a misunderstanding. When set to HARD enable, the drive is forced to remain enabled. If set to soft enable, then the drive receives the enable signal only when the controller is active.
Read more
Ask a question
Related Products
Check items to add to the cart or
We found other products you might like!
