DB25 MOTION CONTROLLER ARDUINO SHIELD
CNC4PC
This is a motherboard for convert of ARDUINO to a connector DB25.
OVERVIEW
This is a motherboard for convert of ARDUINO to a connector DB25
FEATURES
Plugs into into an Arduino UNO and provides a DB25 connector to emulate a parallel port.
DB25 |
||
ARDUINO |
DB25 |
|
2 |
STEP _X_AXIS |
2 |
3 |
STEP_Y_AXIS |
4 |
4 |
STEP_Z_AXIS |
6 |
5 |
DIRECTION_X_AXIS |
3 |
6 |
DIRECTION_Y_AXIS |
5 |
7 |
DIRECTION_Z_AXIS |
7 |
9 |
LIMIT_X_AXIS |
11 |
10 |
LIMIT_Y_AXIS |
12 |
11 |
LIMIT_Z_AXIS |
13 |
12 |
SPINDLE ENABLE |
14 |
13 |
SPINDLE DIRECTION |
16 |
A3 |
COOLANT ENABLE |
1 |
GND |
GND |
18-25 |
PIN HEADER |
||
PIN ARDUINO |
FUNTION ARDUINO |
PIN HEADER |
RX<-0 |
RX<-0 |
1 |
TX->1 |
TX->1 |
2 |
8 |
STEPPER ENABLE |
3 |
AREF |
AREF |
4 |
A5 |
NOT USE |
5 |
A4 |
NOT USE |
6 |
A2 |
CYCLE START/RESUME |
7 |
A1 |
FEED HOLD |
8 |
A0 |
RESET / ABORT |
9 |
VIN |
VIN |
10 |
GND |
GND |
11 |
GND |
GND |
12 |
5V |
5V |
13 |
3.3V |
3.3V |
14 |
RESET |
RESET |
15 |
SKU | C65 |
---|---|
Manufacturer | CNC4PC |
Documents and Download
Product Manual
   Frequently Asked Questions and Answers
- Are you able to mirror a A-Axis?
You can hardware slave the axis and invert the rotation by swapping the motor coils of the stepper.
Read more