DG4S-16035 DC Servo Drive
DG4S-16035 DC Servo Drive
DG4S-16035 - DC Servo Drive
-Power: 160V and 35A.
-Opto-isolated step/direction inputs.
-Tuning through USB port.
-RJ45 connector for PLUG&PLAY like easy connection.
-Selectable 2x and 4x encoder logic.
-Step signal multiplier with selectable 1x, 2x, 3x, 4x, 5x, 6x, 7x, 8x, 9x, 10x options.
-Settable servo error limit from 2 to 20000 encoder counts.
-Fast 32bit advanced PID algorithm with 16bit PID parameters and settable sampling time.
-Current limiting, adjustable from 0 to 20Ampers.
-Servo error viewer software and diagnostics.
-Build-in 32bit DRO (digital readout).
-Step response analyzer in software
| SKU | DG4S-16035 |
|---|---|
| Manufacturer | CNC Drive |
Documents and Download
Product Manual
- User Manual
-
Go To
Software, Installers and Configuration Files
Wiring Information
-
Wiring for C76 Rev2 with DG4S Size: (1.82 MB) - Wiring for C82 Rev3 with DG4S Size: (1.71 MB)
- Wiring for C86ACORN DC Servo Control Box Size: (1.59 MB)
- Wiring for M16D Rev2 with DG4S Size: (1.68 MB)
- Wiring DG3S with C34DG Board Size: (156.27 KB)
- Wiring Sample C34DG4S with Acorn CNC Size: (636.52 KB)
Instructions
- Upgrading a Mill to DG4S Size: (2.55 MB)
- Step by Step C82 for Setting up a for Mach4
- Go to blog
External Document
- Servo Configurator Manual Size: (699.54 KB)
- Tuning Guide
- Go To
Frequently Asked Questions and Answers
- Can I connect more than one DC motor to this module? If yes, how many? Thank you.
No, just one. Keep in mind that you have an encoder on the back of the motor that is feeding the back position of one motor and the driver corrects the position of one motor.
Read more
