DMM DYN4 AC 1.3KW Servo Kit
From $2.50
To $1,120.29
SKU
DK2DMM1.3K
Axes DMM DYN4 AC 1.3KW Servo Kit
FEATURES
- 4-wire high speed serial encoder bus, with 8-bit security code
- DMMDRV4© graphical interface, Adaptive Tuning Technology
- Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
- Industry standard Position, Velocity, Torque servo modes
- Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
- A/B/Z Quadrature incremental encoder output
- Motor Current, Absolute Position, Position Error Monitor Outputs
- RS485/RS232 networking
- Integrated Point to Point S-curve motion, linear & circular coordinated motion
Servo Motor Model | 115-DST-A6 _ _ 1 |
---|---|
Rated Output | 1.3kW |
Rated Voltage | 200V |
Applicable Servo Drive | DYN4-T01 |
Rated Torque | 8.27Nm |
Instantaneous Max. Torque | 23.3Nm |
Rated Current | 10.7A |
Max. Current | 29.5A |
Rated Speed | 1500rpm |
Max. Speed | 3000rpm |
Rotor Inertia | 18.9kg-cm^2 |
Torque Coefficient | 0.929N∙m/A |
Encoder | 16-bit Absolute [ ABS-16-01 ] |
Mass | 9.33kg |
Ratings | Time Rating: Continuous Thermal Class: F Excitation Method: Permanent Magnet Insulation Resistance: DC500V, >20MΩ Noise: ≤60dB; No Special Noise |
Environment | Ambient Temperature: 0~40 °C Storage: -20~50°C Ambient Humidity: 20~80% No Condensation |
Enclosure | IP65 |
Shock | 98m/s2 Max. (10G) |
SKU | DK2DMM1.3K |
---|---|
Manufacturer | DMM-Tech |
Watts | 1800 |
Shaft Size | 19mm |
Shaft Type | Straight |
Motor Frame | 130mm |
Write Your Own Review
Documents and Download
Wiring Information
Videos
External Document
   Frequently Asked Questions and Answers
   Ask a question