DMM DYN4 AC 1KW Servo Kit
From $36.00
To $1,101.00
SKU
DK2DMM1K
Axes DMM DYN4 AC 1KW Servo Kit
FEATURES:
- 4-wire high speed serial encoder bus, with 8-bit security code
- DMMDRV4© graphical interface, Adaptive Tuning Technology
- Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
- Industry standard Position, Velocity, Torque servo modes
- Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
- A/B/Z Quadrature incremental encoder output
- Motor Current, Absolute Position, Position Error Monitor Outputs
- RS485/RS232 networking
- Integrated Point to Point S-curve motion, linear & circular coordinated motion
| Servo Motor Model | 11A-DST-A6 _ _ 1 |
|---|---|
| Rated Output | 1.0kW |
| Rated Voltage | 200V |
| Applicable Servo Drive | DYN4 |
| Rated Torque | 4.77Nm |
| Instantaneous Max. Torque | 14.3Nm |
| Rated Current | 8.2A |
| Max. Current | 24.6A |
| Rated Speed | 1500rpm |
| Max. Speed | 3000rpm |
| Rotor Inertia | 8.5kg-cm^2 |
| Torque Coefficient | 0.774N∙m/A |
| Encoder | 16-bit Absolute [ ABS-16-01 ] |
| Mass | 8.95kg |
| Ratings | Time Rating: Continuous Thermal Class: F Excitation Method: Permanent Magnet Insulation Resistance: DC500V, >20MΩ Noise: ≤60dB; No Special Noise |
| Environment | Ambient Temperature: 0~40 °C Storage: -20~50°C Ambient Humidity: 20~80% No Condensation |
| Enclosure | IP65 |
| Shock | 98m/s2 Max. (10G) |
| SKU | DK2DMM1K |
|---|---|
| Manufacturer | DMM-Tech |
| Watts | 1000 |
| Shaft Size | 19mm |
| Shaft Type | Straight |
| Motor Frame | 130mm |
Write Your Own Review
Documents and Download
Wiring for C76 Rev2 with DYN4
Go To
Frequently Asked Questions and Answers
Ask a question
Related Products
Check items to add to the cart or
