FEATURES

  • 4-wire high speed serial encoder bus, with 8-bit security code
  • DMMDRV4© graphical interface, Adaptive Tuning Technology
  • Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
  • Industry standard Position, Velocity, Torque servo modes
  • Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
  • A/B/Z Quadrature incremental encoder output
  • Motor Current, Absolute Position, Position Error Monitor Outputs
  • RS485/RS232 networking
  • Integrated Point to Point S-curve motion, linear & circular coordinated motion
Servo Motor Model57N-DHT-A6 _ _ 1
Rated Output 0.4kW
Rated Voltage 60V 200V
Applicable Servo Drive DYN2 DYN4
Rated Torque 1.27Nm
Instantaneous Max. Torque 3.82Nm
Rated Current 8.4A 2.8A
Max. Current 21.0A 8.5A
Rated Speed 3000rpm
Max. Speed 5000rpm
Rotor Inertia 0.426kg-cm^2
Torque Coefficient 0.181N∙m/A 0.455N∙m/A
Encoder 16-bit Absolute [ ABS-16-01 ]
Mass 1.65kg
Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Storage: -20~50°C
Ambient Humidity: 20~80%
No Condensation
Enclosure IP65
Shock 98m/s2 Max. (10G)

Note: For this setup voltage must be 110VAC, it does not support 220VAC.

More Information
SKUDK400W-5_E
ManufacturerDMM-Tech
Watts400
Shaft Size1/4"
Shaft TypeD-Cut
Motor FrameNema 23

Product Download

   Frequently Asked Questions and Answers


   Ask a question

Terms & Conditions

There is no content for Term & Conditions.
I Agree with the Terms
SET CABLES FOR DYN4 40/60/80MM SERVO MOTOR
$400.00

Start Over


View as Grid List

4 Items

per page
Set Descending Direction
View as Grid List

4 Items

per page
Set Descending Direction
© 2017 CNC4PC. All Rights Reserved.