DMM DYN4 Servo Kit 400W at 200V

$404.25
On request
SKU
DK400W-3
Combining the latest DMM servo control technology with 16-bit high resolution feedback and brand new monitor functions, the DYN4 AC Servo Drive achieves ultimate accessible performance. Industry standard pulse/analog/serial interface, easy PC set up and low cost makes the DYN4 AC Servo Drive most applicable and suitable for any motion control application.
    • 4-wire high speed serial encoder bus, with 8-bit security code
    • DMMDRV4© graphical interface, Adaptive Tuning Technology
    • Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
    • Industry standard Position, Velocity, Torque servo modes
    • Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
    • A/B/Z Quadrature incremental encoder output
    • Motor Current, Absolute Position, Position Error Monitor Outputs
    • RS485/RS232 networking
    • Integrated Point to Point S-curve motion, linear & circular coordinated motion
Servo Motor Model640-DST-A6 _ _ 1
Rated Output 0.4kW
Rated Voltage 60V 200V
Applicable Servo Drive DYN2 DYN4
Rated Torque 1.27Nm
Instantaneous Max. Torque 3.82Nm
Rated Current 8.4A 2.8A
Max. Current 21.0A 8.5A
Rated Speed 3000rpm
Max. Speed 5000rpm
Rotor Inertia 0.426kg-cm^2
Torque Coefficient 0.181N∙m/A 0.455N∙m/A
Encoder 16-bit Absolute [ ABS-16-01 ]
Mass 1.65kg
Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Storage: -20~50°C
Ambient Humidity: 20~80%
No Condensation
Enclosure IP65
Shock 98m/s2 Max. (10G)
More Information
SKUDK400W-3
ManufacturerDMM-Tech
Watts400
Shaft Size14mm
Shaft TypeStraight
Motor Frame60mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Product Download

Product Manual

Videos

  • Driver Auto Tuning Demo
  •  Go To
  •  
  • High Inertia Load - Response
  •  Go To
  •  
  • DYN4 AC Servo System Complete Setup and Overview
  •  Go To
  •  

External Document

   Frequently Asked Questions and Answers


   Ask a question

Terms & Conditions

There is no content for Term & Conditions.
I Agree with the Terms
© 2017 CNC4PC. All Rights Reserved.