Does this work with port 1,4,&5 of a UC300 + UCBB. I will use port 2&3 for controlling the motors.I need 4 to 5 stepper motors and 11 external devices (few of them are activated at the same time).RegardsDoes this work with port 1,4,&5 of a UC300
Does this work with port 1,4,&5 of a UC300 + UCBB. I will use port 2&3 for controlling the motors.I need 4 to 5 stepper motors and 11 external devices (few of them are activated at the same time).RegardsDoes this work with port 1,4,&5 of a UC300
115 views
 July 25, 2021
YES, it will work with UC300ETH or any other motion controller on ports that use pins 2-9 as outputs.