Knowledge Base
Search our articles or browse by category below
-
Why use Ethernet Connection for my Motion Controller?
The Ethernet Connection has many advantages over USB. It is more reliable as Ethernet runs a client-server connection, while USB runs as a Windows Device. If there happens to be any glitch in the communication, you can lose the USB d...
Read more -
How fast does my Motion Controller need to be?
You can estimate the appropriate speed requirement for your motion controller by understanding how fast you need your pulse stream to be. You will need to balance axis travel speed and the step resolution or length of each step in actual machi...
Read more -
Should I use an External Motion Controller running in real-time for my CNC?
The main advantage of using an external motion controller is that runs all the function in a real-time environment. So many functions, like homing, reading an encoder, threading, probing, etc., are tied to the exact time in which they occur. I...
Read more -
I have a Warp9 ESS. To reduce some EMI issues, I would like to convert ESS 5v pulse/direction to 24v since my motor drivers accept 5v or 24v pulse/direction signals. Is this the best board for that purpose?
Yes, the C79 or C80 would help you safely tap into +24vdc logic, which can be less prone to noise. Make sure the negative of the main power supply is not common with the negative of the ESS or breakout board. I think the C25XP should be a good option fo...
Read more