CNC4PC
H-Bridge 9 Motor Driver
-Drive up to 60V A 150W DC Motor
-60V 3A 150 W 'a kadar DC Motor srebilir
-Power FETs are 100V 19A
-Transistr of power100V 19A dir.
-Opto coupler isolated inputs
-Opto Coupler and has been isolated inputs can slim 5V TTL level.
-Brake / Idle control is also possible
-Fran and is free conrtrol mknd
-Can be use with CAP04, driving Torch Z axis motor for UP and DOWN control.
-CAP04 When used with capacitive sensor can automatically control the torch made ??ykseklik
-Adjustable Current allows you to limit the TORQUE of motor
-Adjustable flow control, motor allows you to limit the TORQUE .
-Limit Switch Inputs can provide only one direction rotation. There is no need additional relay and directonal diodes.
-Limit Switch�by more forward / backward to go on R RICE: Rest . There is no need for external RLE .
-Input and output connectors are possible to mount vertically for space saving. (Please inform us during on order)
-Input , Output connectors can be mounted vertically (please specify in the order during Lutfi )
For Building a Torch Lifter -Torch Levitator
New H-Bridge-9 with Adjustable Current Control
Motor Controller / Driver
A and B inputs are for DIRECTON and SPEED control
Low Speed
High Speed
A in |
B in |
Motor |
0 |
0 |
Motor Brake |
1 |
0 |
Run A direction |
0 |
1 |
Run B direction |
1 |
1 |
Motor Idle |