Nema42 Closed Loop Stepper motor, driver, Hybrid servo kit, Shaft 19MM
From $549.95
To $639.20
Nema42 Closed Loop Stepper motor, driver, Hybrid servo kit, Shaft 19MM
NEMA42 Closed Loop Stepper Motor Driver - Hybrid Servo Kit:
1pc NEMA 42 Closed Loop Motor shaft size 19 mm
- 42-12N-1000
OR
- 42-20N-1000
1pcs Encoder Cable 3m or 5m length (Optional)
1pcs Power cable, 3m or 5m length (Optional)
1pcs 220-60H Driver (ES-DH2306)
Features
- 3 phase
- NEMA 42 frame size -- Distance between mounting holes is 93mm
- 20 Nm or 12 NM (2,832 oz - in or 1699 oz-in) holding torque
- Speed Range: 0 - 2,000 RPM
- Integrated 1,000-line incremental encoder
- Smooth movement
- Low motor heating and noise
1: NEMA 42 Closed Loop Motor
A. 42-12N-1000: 1699 oz-in, shaft size: 19 mm
Mounting Hole: 93.34mm
Specification:
Current: 4.2A
Voltage: 5V
Holding Torque: 12 N-m, 1699 oz-in
The encoder on back: 1000 line
Phase Inductance: 13 mH
B. KL42-20N-1000: 2832 oz-in, shaft size: 19 mm,
Mounting Hole: 93.34mm
Specification:
Current: 5.2A
Voltage: 10V
Holding Torque: 20 N-m, 2832 oz-in
The encoder on back: 1000 line
Phase Inductance: 18 mH
2: 220-60H Driver (ES-DH2306)
Features:
- Step based servo control
- Closed position loop for no loss of movement synchronization
- No loss of steps; no hunting; no overshooting;
- Operating voltage: 150 to 230 VAC
- Peak current MAX 6.0A
- High torque at starting and low speed
- No torque reservation
- High stiffness at standstill
- Significantly reduced motor heating
- Smooth motor movement and extra low motor noise
- Quick response, no delay, and zero settling time
- On-board LED panel for custom configuration and motion mode display
- Plug-and-play and no tuning for almost all applications
- Micro step resolution value from 200-51,200 (increased by 1) via software configuration
By taking direct 110 / 120 or 220 / 230 VAC input, Leadshine ES-DH series high voltage easy servo drives can power large NEMA 34 and 42 easy servo motors and offer huge torque to applications with motion control systems.
Leadshine ES-DH series easy servo drives are based on the latest DSP technology and Leadshine's advanced control algorithm of combing brushless servo and stepper systems. They are featured with a closed position loop, offering huge torque, excellent acceleration & quick response, no torque reservation, high standstill stiffness, extra low noise & heating, smooth motor movement, no hunting, no overshooting for almost zero settling time, and no tuning for almost all applications.
SKU | CL19_B |
---|---|
Manufacturer | Automation Technology |
Shaft Size | 19mm |
Motor Frame | Nema 42 |
Dual/Single Shaft | Single |
Closed Loop | Yes |