RJ45 to ClearPath Driver
$22.50
In stock
SKU
C34CP
CNC4PC
RJ45 to ClearPath Driver
OVERVIEW
This interfaces board is used for the connection between C82, C76, C86ACORN, C86MASSO, and the
CLEAR PATH SERVO-DRIVE.
This connector is intended to be used with the ClearPath sold by Teknic.
FEATURES
-
RJ45 Connector per Axis.
-
Select Jumper for Hardware Enable or Software Enable.
-
Integrates the fault and enables lines to the breakout board. Allowing a driver's fault to trigger E-STOP and to be able to disable the driver when the system is disabled.
-
Connect to the original IP65 ClearPath cable.
| SKU | C34CP |
|---|---|
| Manufacturer | CNC4PC |
Write Your Own Review
Documents and Download
Product Manual
-
User Manual Size: (677.03 KB)
Wiring Information
- Wiring Sample C34CP Rev1 with C35S Size: (317.74 KB)
- Wiring Sample C34CP Rev1 with Acorn Size: (460.37 KB)
- Wiring Sample C34CP Rev1 with C82 Size: (2.21 MB)
- Wiring Sample C34CP Rev1 with C76 Size: (1.79 MB)
- Wiring Sample C34CP Rev1 with M16D Size: (1.84 MB)
- Wiring Sample C34CP Rev1 with HTG5 Size: (390.47 KB)
- Wiring Sample C34CP Rev1 with C62 Size: (581.24 KB)
- Control Box for Plasma 1 Size: (3.66 MB)
Videos
- Instructions for John Sundman's Router
-
Go To -
Instructions for John Sundman's Router
Old Documents
- Wiring Sample C76, M16D, C82 with Driver Clear Path Size: (1.21 MB)
Frequently Asked Questions and Answers
- Do the HLFB pins from the Clearpath motors show up anywhere accessible on this board? Thanks!
The HLFB is not accessed directly, but it is accessed by the breakout board and used to trigger e-stop if activated.
Read more
Ask a question
Related Products
Check items to add to the cart or
