11080 8 AmpBipolar Stepper Motor Driver
1: High Performance
2: Supply voltage AC 80-120VAC, Power supply is built in.
3: Automatic Idle-Current Reduction
4: Micro step: 1,2,4,5,6,8,10,16, 18,10,32,40,50,64,128,256
5: Current: 0.5A, 1.0A,1.5A, 2.0A,2.5A,3.0A,3.5A,4.0A, 4.5A
5.0A, 5.5A, 6.0A, 6.5A, 7.0A,7.5A, 8.0A
5: Full or Half Current Mode: Sw4: 1 = Half Current
6: TTL compatible and Optically Isolated Signal I/O
7: Short-voltage, over-voltage, over-current and over temperature protection
8: Pulse input frequency up to 200 KHz
9: Support PUL/DIR and CW/CCW modes
It is used for high Inductance NMEA34 or NEMA42 motor
You do not need power supply
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.