Skip to Content
  1. All Products
  2. All Products
  3. C76 - UC300ETH Multifunction Board
-

OVERVIEW

The C76 supplies full access to the power of the UC300ETH board.  It emulates 5 ports for discrete signals and a port for analogs.  It allows wiring TTL or industrial-type Open Collector inputs and outputs.  

FEATURES

  • Designed for UC300ETH motion controller.
  • 3 Expansion Ports
  • Built-in PWM-Based Speed Control and Two Built-in Electromechanical Relays with NO and NC positions for spindle control.
  • Monitors E-Stop, Safety Charge Pump, Driver Fault, and VFD Fault. 
  • It is compatible with family of C34 connector boards  that allow quickly connecting to popular drives connecting not just the step and direction signals, but also the fault and enable signals.
  • Electromechanical Relay with NO and NC positions for general purpose (Port_2 16 or 17, jumper-selectable).  If tied to pin 17 The relay will remain active while the system is active, making it ideal to control the power to the system.
  • Independent Optoisolation Circuits for each port.
  • Power terminal (10-30VDC).  This can power the entire logic of the system.
  • Outputs +3.3vdc at 24mA TTL.
  • Status LEDs on all inputs connections.
  • 18 inputs ports.
  • Flexible Driver Connection.
  • Analog I/O port pinout.


To be successful your content needs to be useful to your readers.

Start with the customer – find out what they want and give it to them.