NEMA42 Closed Loop Stepper Motor Driver - Hybrid Servo Kit:
1pc NEMA 42 Closed Loop Motor, shaft size 19 mm
- 42-12N-1000 (42-12N-1000 Drawing and Wiring)
- 1pcs Encoder Cable 3m or 5m length (Optional)
- 1pcs Power cable, 3m or 5m length (Optional)
- 1pcs 220-60H Driver (ES-DH2306)
Features
- 3 phase
- NEMA 42 frame size
- 20 Nm or 12 NM (2,832 oz-in or 1699 oz-in) holding torque
- Speed Range: 0 - 2,000 RPM
- Integrated 1,000-line incremental encoder
- Smooth movement
- Low motor heating and noise
Specification
1: NEMA 42 Closed Loop Motor
A. 42-12N-1000: 1699 oz-in, shaft size: 19 mm
Mounting Hole: 93.34mm
Specification:
Current: 4.2A
Voltage: 5V
Holding Torque: 12 N-m, 1699 oz-in
The encoder on the back: 1000 line
Phase Inductance: 13 mH
2: 220-60H Driver (ES-DH2306)
Features:
- Step-based servo control
- Closed position loop for no loss of movement synchronization
- No loss of steps; no hunting; no overshooting;
- Operating voltage: 150 to 230 VAC
- Peak current MAX 6.0A
- High torque at start-up and low speed
- No torque reservation
- High stiffness at standstill
- Significantly reduced motor heating
- Smooth motor movement and extra-low motor noise
- Quick response, no delay, and zero settling time
- On-board LED panel for custom configuration and motion mode display
- Plug-and-play and no tuning for almost all applications
- Micro-step resolution value from 200-51,200 (increased by 1) via software configuration
