Serial Modbus Pendant Interface Card
$36.00
In stock
In stock
SKU
C22M1
CNC4PC
This card has been designed to provide an interface Modbus communications with the pendants provided by CNC4PC (MPG2, MPG3, and MPG4), The board conditions the signals and provides power to the pendant. The board also has a relay that reflects the status of the e-stop button on the pendant so hardware e-stop functions can be implemented.
OVERVIEW
This card has been designed to provide an interface Modbus communications with the pendants provided by CNC4PC (MPG2, MPG3, and MPG4), The board conditions the signals and provides power to the pendant. The board also has a relay that reflects the status of the e-stop button on the pendant so hardware e-stop functions can be implemented.
FEATURES
- IDC26 Connector
- Connects 4 and 6-axis pendants (MPG2, MPG3, and MPG4)
- Has a relay that reflects the status of the e-stop button.
- Status LEDs.
- Din rail mountable.
- USB Communications.
Write Your Own Review
Frequently Asked Questions and Answers
-
HelpI bought two of these together with their db26 to db25 cables. I need the diagram for the MPG 2, mine has a 3-row DB15 connector, I'm going to change it to the DB25. I can send wiring diagram if required. Thank you
The C22 and C22M are intended to be used with the MPGs in our website, like this one: https://cnc4pc.com/mpg2-pendant.html You are welcome to use the documentation found on our website to wire your own connector and use the files found in our website.
Read more
Related Products
Check items to add to the cart or
