CNC4PC Touch Screen CNC Console for Mach4 Ver.2 Used software: Mach4 4.2.0.5382. https://www.machsupport.com/ftp/Mach4/DevlopmentVersions/Mach4Hobby_Installer-4.2.0.5382.exe Used hardware: SC-1. Touch Screen CNC Console STEP 1: On many systems, MS ...
UCCNC Configuration for MPG on C76 or C94 Used software: UCCNC Version 1.2115 http://www.cncdrive.com/UCCNC/setup_1.2115 Used Plugin: https://cnc4pc2.s3.us-east-2.amazonaws.com/files/CNC4PC_Pendant_V2.0.0.0.zip STEP 1: Wiring sample: https://... C94
Mach3 and ESS Plugin Configuration for THC on C82 or C25XP Used software: Mach3 Version 3.043.062 with Win 10 Fix . Mach3 ESS Plugin v180220 u4f1L Used hardware: C25XPR1 and ESS V4.0. This configuration shows how to configure a standard Mach3 Plasma profile. ...
Wiring an NPN sensor to a C11G General Recommendations on Setting up Home/Limit Switches: Note that the Limit function is disabled while homing, so it is smart to use the same switches for homing and limits. It is also a good pract...
Initial Step by Step Wiring and Testing of a C94 with Mach3 Used software: Mach3 Version 3.043.062 with Win 10 Fix. STEP 1: Connect an E-Stop button to short the E-Stop terminals. This should give you a green LED while the board is powered and the e-stop is cl... C94
Mach3 and UC300ETH Plugin Basic Configuration for C94 and C76 Used Software: The plugin for this setup can be downloaded from the CNC Drive website: UCX00 automatic installer An XML with this configuration can be downloaded from here: C94.xml PLUGIN CONFIGURATIO... C94
Manual Pendant Configuration for Mach4 with ESS and C22 Used software: Mach4 4.2.0.4612. https://warp9td.com/files/Software/Mach4/Mach4Hobby_Installer-4.2.0.4612.exe ESS Plugin Mach4: ESS v278.1 htt ps://warp9td.com/files/Plugins/ESS/Mach4/ESS_Mach4_v278...
C76 Simphoenix E500 Series VFD Setup Recommendations: The configuration you did on the initial Step by Step instructions for Mach3 or Mach4 configured the control software and plugin, you just need to set the max spindle speed. Keep in m...
UCCNC with UC300ETH Basic Configuration for C76 or C94 Software: UCCNC V 1.2115 Hardware: C76 or C94 UC300ETH STEP 1: These wiring samples for connection can be used: https://www.cnc4pc.com/pub/media/productattachments/files/CD_2-C76R2_4.pdf Step 2: Setti... C94