C25XP Spindle Setup C25XP Hitachi VFD Setup C25XP Huanyang VFD Setup C25XP Simphoenix E500 Series VFD Setup C25XP with KBIC SI5- SI6 DC Speed Controllers...
Initial Step by Step Wiring and Testing of a C25XP with Mach4 Ver.4 BETA The main objectives of these step-by-step instructions are: Power the C25XP board and connect the e-stop button, then test that the board activates/deactivates at the hardware level only with e-stop. ...
Initial Step by Step Wiring and Testing of a C25XP with Mach4 V2 The main objectives of these step-by-step instructions are: Power the C25XP board and connect the e-stop button, then test that the board activates/deactivates at the hardware level only with e-st...
Mach4 / ESS Plugin configuration for C25XP, and C82 V.2 Hardware and software used Used software: Mach4 4.2.0.4612. https://warp9td.com/files/Software/Mach4/Mach4Hobby_Installer-4.2.0.4612.exe ESSPlugin Mach4: ESS v278.1 https://warp9td.com/files/Plugins/E...
MACH4 Configuration for THC-2 Rev.5 on C82 or C25XP The files on this version only work with Firmware FF5V11. Used software: Mach4 4.2.0.4612. https://warp9td.com/files/Software/Mach4/Mach4Hobby_Installer-4.2.0.4612.exe Screen and Macros: https://cnc4p...
UCCNC Configuration for THC-2 Rev.5 on C76 or C94 The files on this version only work with Firmware FF5V11. Used software: UCCNCVersion 1.2115. https://www.cncdrive.com/UCCNC/setup_1.2115.exe Screen and Macros: https://www.cnc4pc.com/pub/media/produc... C94
Driver Connection C25XP Connecting C25XP Rev. 5 and Closed Loop Stepper Motor Driver HSB57 with Drive Fault Detection Connecting C25XP Rev. 5 and ClearPath with Drive Fault Detection...