UCCNC Configuration for Plasma Floating Head on C76 or C94 Overview: This combination of macros and screen allows the user to configure the plasma without commanding motion on the Z axis, but to set all the parameters in the screen DRO fields so the operator ... C94
CNC4PC Touch Screen CNC Console for Mach4 Ver.2 Used software: Mach4 4.2.0.5382. https://www.machsupport.com/ftp/Mach4/DevlopmentVersions/Mach4Hobby_Installer-4.2.0.5382.exe Used hardware: SC-1. Touch Screen CNC Console STEP 1: On many systems, MS ...
UCCNC Configuration for MPG on C76 or C94 Used software: UCCNC Version 1.2115 http://www.cncdrive.com/UCCNC/setup_1.2115 Used Plugin: https://cnc4pc2.s3.us-east-2.amazonaws.com/files/CNC4PC_Pendant_V2.0.0.0.zip STEP 1: Wiring sample: https://... C94
Connecting C25XP Rev. 5 and Closed Loop Stepper Motor Driver HSB57 with Drive Fault Detection ... C25XP
Mach3 and ESS Plugin Configuration for THC on C82 or C25XP Used software: Mach3 Version 3.043.062 with Win 10 Fix . Mach3 ESS Plugin v180220 u4f1L Used hardware: C25XPR1 and ESS V4.0. This configuration shows how to configure a standard Mach3 Plasma profile. ... C25XP C82
Wiring an NPN sensor to a C11G General Recommendations on Setting up Home/Limit Switches: Note that the Limit function is disabled while homing, so it is smart to use the same switches for homing and limits. It is also a good pract...
Initial Step by Step Wiring and Testing of a C94 with Mach3 Used software: Mach3 Version 3.043.062 with Win 10 Fix. STEP 1: Connect an E-Stop button to short the E-Stop terminals. This should give you a green LED while the board is powered and the e-stop is cl... C94