UCCNC Configuration for Plasma Floating Head on C76 or C94 Overview: This combination of macros and screen allows the user to configure the plasma without commanding motion on the Z axis, but to set all the parameters in the screen DRO fields so the operator ... C94
UCCNC Configuration for MPG on C76 or C94 Used software: UCCNC Version 1.2115 http://www.cncdrive.com/UCCNC/setup_1.2115 Used Plugin: https://cnc4pc2.s3.us-east-2.amazonaws.com/files/CNC4PC_Pendant_V2.0.0.0.zip STEP 1: Wiring sample: https://... C94
Initial Step by Step Wiring and Testing of a C94 with Mach3 Used software: Mach3 Version 3.043.062 with Win 10 Fix. STEP 1: Connect an E-Stop button to short the E-Stop terminals. This should give you a green LED while the board is powered and the e-stop is cl... C94
Mach3 and UC300ETH Plugin Basic Configuration for C94 and C76 Used Software: The plugin for this setup can be downloaded from the CNC Drive website: UCX00 automatic installer An XML with this configuration can be downloaded from here: C94.xml PLUGIN CONFIGURATIO... C94
UCCNC with UC300ETH Basic Configuration for C76 or C94 Software: UCCNC V 1.2115 Hardware: C76 or C94 UC300ETH STEP 1: These wiring samples for connection can be used: https://www.cnc4pc.com/pub/media/productattachments/files/CD_2-C76R2_4.pdf Step 2: Setti... C94
Initial Step by Step Wiring and Testing of a C76 or C94 with UCCNC The main objectives of these step-by-step instructions are: Power the Board and e-stop and test that the board activates/deactivates at hardware level only with e-stop. Install the UCCNC license and c... C94